Description
The KD1050-015 air/oil separator replacement is a large aftermarket separator element designed to remove oil mist from the compressed air stream. Its fiberglass and microglass media captures fine oil aerosols while allowing recovered lubricant to drain from the element.
This separator uses an inside-to-outside flow pattern and is rated for airflow up to 1,050 CFM at 100 PSI. Replacing a loaded separator helps control pressure drop, reduce lubricant carryover, and maintain efficient compressor operation.
| Product Type | Air/Oil Separator Element |
| Replaces | KD1050-015 |
| Filter Media | Fiberglass/Microglass |
| Micron Rating | 0.3 Micron |
| End Cap Construction | Open/Closed Steel Caps |
| End Seal | Urethane |
| Flow Direction | Inside to Outside |
| Flow Capacity | 1,050 CFM at 100 PSI |
| Pressure Drop | 2–3 PSI |
| Operating Pressure | 100 PSI |
| Maximum Operating Pressure | 350 PSI |
| Operating Temperature | -35°F to 300°F |
| Connection | 4-Inch NPT, Schedule 40 |
| Outside Diameter | 19.00 Inches |
| Inside Diameter | 4.00 Inches |
| Height | 32.00 Inches |
| Weight | 64 Pounds |
Warranty Information
We guarantee this KD1050-015 filter separator replacement will meet or exceed the specifications, performance and warranty of the OEM separator.