Description
The Ingersoll Rand 23442130 air/oil separator replacement is a large aftermarket separator element designed to remove oil mist from the compressed air stream. Its fiberglass and microglass media captures fine oil aerosols while allowing recovered lubricant to drain from the element.
This separator uses an inside-to-outside flow pattern and is rated for airflow up to 1,050 CFM at 100 PSI. Replacing a loaded separator helps control pressure drop, reduce lubricant carryover, and maintain efficient compressor operation.
| Product Type | Air/Oil Separator Element |
| Replaces | Ingersoll Rand 23442130 |
| Filter Media | Fiberglass/Microglass |
| Micron Rating | 0.3 Micron |
| End Cap Construction | Open/Closed Steel Caps |
| End Seal | Urethane |
| Flow Direction | Inside to Outside |
| Flow Capacity | 1,050 CFM at 100 PSI |
| Pressure Drop | 2–3 PSI |
| Operating Pressure | 100 PSI |
| Maximum Operating Pressure | 350 PSI |
| Operating Temperature | -35°F to 300°F |
| Connection | 4-Inch NPT, Schedule 40 |
| Outside Diameter | 19.00 Inches |
| Inside Diameter | 4.00 Inches |
| Height | 32.00 Inches |
| Weight | 64 Pounds |
Warranty Information
We guarantee this aftermarket Ingersoll Rand 23442130 filter replacement will meet or exceed the specifications, performance and warranty of the OEM filter element. This is an aftermarket / equivalent product made in the USA. This is NOT manufactured by Ingersoll Rand.
Filter Element Store operates independently as a provider of aftermarket replacement parts and is not associated with the manufacturers referenced in this listing. Any mention of original equipment manufacturer (OEM) names within this context acknowledges them as the trademarks of their respective manufacturers. For products labeled as "equivalent," "replacement," "replaces," "cross," or "aftermarket," any reference to OEM names and part numbers is solely for informational purposes.